Cut clothing is not a stand-alone work, before cutting to be expected, such as shop, paint samples and other preparatory work. Huizhou Wang Kai garment factory shop floors decking material is in accordance with the provisions and the length of the clothing shop materials according to the requirements of the material, laid on the bed cut to draw samples and open cut. For stretches of materials, shop materials also need to be placed after a few hours, so that after the reduction of stress retraction. Method is not correct pieces of clothing will not only shape the structure completely deviate from the design, but also caused a lot of waste. When batch processing overalls, producers will bring great losses. Therefore, uniforms trimmed to master the following requirements: a master approach corner. Where the garment around the corner, should be on both sides of the opening angle of the different feed cut, you can not cut corners in a row, in order to ensure accurate cutting. 2, playing notches positioned to be accurate, and clear notches shall not exceed 3mm long. 3, master the correct order to open the CD. That is, without transection straight off, after the first outside the mouth in the mouth, after the first zero small material whole aniseed, paragraph by paragraph, reclaimers. 4, when the fight to be accurate positioning notches, notches shall not exceed 3mm and clear and lasting. http://www.hkzfc.com